How to Use Versatile Electric Roller with LP3?

  • Updated

This guide provides clear and easy steps to use the Versatile Electric Roller with your LaserPecker LP3.

#1. Introduction to the Versatile Electric Roller

Versatile Electric Roller Placement

Place the Versatile Electric Roller as shown in the image below to ensure proper alignment with the LP3.

Ports:

Familiarize yourself with the ports you need to connect and use the Versatile Electric Roller.

#2 Start Your First Engraving with LP3 & Versatile Electric Roller

In this section, we will help you start your first engraving with LP3 & Versatile Electric Roller step-by-step.

Step 1: Import Your Design

Prepare your design and import it into the LaserPecker Design Space (LDS).

Step 2: Turn on the Versatile Electric Roller

Go to the "Mode Setting" interface and toggle on the "Versatile Electric Roller" option.

Select the engraving mode: "Slab Mode" or "Cylinder Mode,"" depending on your project.

Connect the Versatile Electric Roller to the power supply before opening LDS and enabling the toggle. Otherwise, it won't function properly.

Step 3: Preview

Click "Continue" to activate the Versatile Electric Roller and preview the engraving area.

Step 4: Start Engraving

Set the engraving parameters and begin the engraving process. Enjoy the final results!

Was this article helpful?

0 out of 0 found this helpful