LaserPecker image transfer Gcode tutorial

1. Download and install the corresponding version of Inkscape software on the Inkscape official website.

1.1 Software download link：https://inkscape.org/release/inkscape-1.2.1

1.2 The interface opened after the software installation is successful.

2. Install Inkscape auxiliary plug-in Laserpecker&KM Laser

2.1 Download the LaserPercker_V2.0.0.zip compressed package and unzip it below:

Download : LaserPercker_V2.00.zip

2.2 Find the Inkscape installation path, copy the files in the compressed package to Inkscape\share\inkscape\extensions. 

2.3 Download the KM-Laser-master.zip compressed package file and unzip it below:

Download :KM-Laser-master.zip

2.4 Copy the folder in the compressed package to \Inkscape\share\inkscape (choose to replace all when prompted for file conflicts).

2.5 Open the Inkscaper software, the two plug-ins appear on the interface and the installation is successful.

3. Import pictures for format conversion

3.1 Drag the picture into Inkscape software and set the size.

3.2 Select the picture, click Path - trace bitmap outline.

3.3 Adjust the parameters to the figure below, and click Apply in the lower right corner.

3.4 Pull out the wireframe and delete the original image.

3.5 Export the Gcode file, there will be a set of prompt boxes after the export is successful, the content can be ignored.