FAQs for LP2

  • Updated

Below, we've gathered a list of frequently asked questions about the LaserPecker 2 (LP2).

  • The LP2 is a 5w, 450 nm Blue Diode Laser engraving machine.

  • The recommended focal distance of LP2 is 11 cm (110 nm), which can be achieved using one of the following two methods: red light focusing or manual focusing.

  • The standard engraving area of LP2 is an oval measuring 115 mm x 80 mm. When using the Electric Roller accessory, its engraving area can be expanded to 100 x 2000 mm.

  • LP2 can engrave at speeds from 6mm/s to 600mm/s.

  • App - LaserPecker Design Space or LaserPecker

    Software - LaserPecker Design Space

  • Sorry, LP2 isn't compatible with Lightburn currently.

  • LP2 can work continuously for 63 hours without stopping.

  • LaserPecker's Versatile Electric Roller, Power Bank, Powerpack Plus, Air Purifier, Bluetooth Dongle, Batch Engraving Button, and Protective Goggles, can all be used with the LP2.

    → Click here to learn more about all of the LP2 accessories.

  • The LP2 is registered with the following safety certifications; IEC60825-1, CE, FCC, FDA, CDRH. Click here for more information about laser safety certifications.

Was this article helpful?

4 out of 16 found this helpful