This guide provides step-by-step instructions on using the Slide Extension with your LaserPecker LP4.
#1. Introduction to the Slide Extension
Package Contents:
Check all parts in the Slide Extension package. If anything is missing, contact our after-sales support via a ticket form.
Assembly & Material Placement
For detailed assembly steps, refer to the Rotary Extension User Manual or watch our YouTube tutorial.
(The final result after assembly)
Ports:
Here are all the ports you'll need to use with the Slide Extension.
Placement
To use the Slide Extension, the Riser Add-on must be installed between the LP4 Laser Unit and Electric Stand. Tighten the two knobs to secure the Riser Add-on in place.
Ensure the Slide Extension and LP4 are correctly positioned and connected.
Position the Slide Extension so that the side with the LaserPecker label is on the left.
Cable Connection
Use the provided cable to properly connect the Rotary Extension to the LP4.
Use the binder clips from the toolbox to secure thin materials and prevent misalignment during the engraving process.
#2 Start Your First Engraving with LP4 & Slide Extension
In this section, we will help you start your first engraving with LP4 & Slide Extension step-by-step.
Step 1: Import Your Design
Prepare your design and import it into the LaserPecker Design Space (LDS).
Step 2: Turn on the Slide Extension
Go to the "Mode Setting" interface and toggle on the "Slide Extension"
Connect the Slide Extension to the power supply first, then open LDS and enable the toggle. Otherwise, it won't function properly.
Step 3: Preview
Tap "continue" to preview the area to be engraved.
Step 4: Final Result
Set engraving parameters and start engraving to see the final results.
Tip 1: Batch Engraving with Slide Extension
With Slide Extension, the batch engraving of the variable text can become easier. For more details, please refer to the YouTube video!
Tip 2: Batch Cutting with Slide Extension
With Slide Extension, the batch cutting of the patterns becomes easier. For more details, please refer to the YouTube video!