Safety Enclosure - Maintenance

Dust accumulates on the machine during daily use, especially after 3D embossing projects, which produce dust and fumes. Regular cleaning is necessary.

Issue Description:

Dust accumulates on the machine during daily use, especially after 3D embossing projects, which produce dust and fumes. Regular cleaning is necessary.

Step-by-step Solution

Step 1: Power off the machine

Ensure safe operation and avoid electric shock accidents.

Step 2: Clean residue

① Clean the Dust Filter to avoid dust build-up.

② Use a handheld vacuum cleaner or soft brush to remove dust and residue from the work area and other parts.

③ Clean the Field Lens, Flame Sensor, and Flood Lights with a lint-free cloth moistened with alcohol.

Regular cleaning of these parts improves clarity, sensitivity, and brightness.

Step 3: Reduce Smoke

To maintain a cleaner environment and reduce smoke, use the LaserPecker Air Purifier, which reduces nearly all smoke.

Step 4: Check the ventilation regularly

If you notice smoke leaking from the Safety Enclosure, it's likely due to a blocked fan. Remove and clean the fan to ensure proper smoke evacuation.

Step 5: Check the ventilation regularly

If the base plate's movement is obstructed or not smooth, apply lubricant to the lead screws and guide rails on both sides of the Safety Enclosure.