LP2 Safeguard Won't Power On

  • Updated

Problem Description

After connecting to power, the machine remains unresponsive and won't turn on.

Troubleshooting Steps

  1. Check for any loose connections on the DC-DC cable between the LP2 and the Standard Enclosure, as well as the power adapter.
图1.PNG
  1. Check if the power adapter is properly powered on. The power adapter has an indicator light that should stay lit when it's receiving power. If the light is off, try a different power outlet or use another 12V/5A power adapter.
图2.png
  1. Ensure the Emergency Stop Switch is released. Activating the Emergency Stop Switch will also cut power to the machine.
图3.png

Was this article helpful?

0 out of 0 found this helpful