This guide aims to help users upgrade their machines' firmware to the latest version using LaserPecker Apps and PC Software.
Before proceeding, please note that previous engraving documents may be lost during the upgrade process. It is highly recommended to back up your data locally.
1. Update Machine's Firmware Using LDS App
|
For users of the LP1 Pro(Firmware v2.7.0+), LP1 Plus, LP2, LP3, LP4, LP5 and LX series, follow these steps to upgrade your machine's firmware via the LaserPecker Design Space app: (1) Connect your LP machine to the app (2) Navigate to "Machine Settings" (3) Select "Firmware Version" (4) Click on "Confirm" to upgrade |
2. Update Machine's Firmware Using LDS PC
Please note: For a successful upgrade, connect your machine to the PC software via a Bluetooth dongle. A USB cable connection will not work for firmware upgrades.
Way 1: Firmware Upgrade Pop-up
When you connect your machine to the PC software, a pop-up notification will appear, prompting you to upgrade your machine's firmware. Simply click "OK" to start the firmware upgrade immediately.
Way 2: Manual Firmware Update via Machine Settings
You can also manually update the machine's firmware using the PC software by following these steps:
(1) Connect your machine to the PC software
(2) Navigate to "Machine Settings icon"
(3) Select "Firmware Upgrade"
(4) Click "OK" to start the upgrade
3. Important Instructions for Firmware Upgrade
(1) Ensure your LaserPecker machine is connected to a stable power source and switched on.
(2) Do not use or move your LaserPecker machine until the upgrade process is finished and the indicator light turns blue. Otherwise, it will interrupt the upgrade process and may cause a malfunction.
(3) When the firmware upgrade is complete, turn the machine off and then turn it back on.
(4) Avoid upgrading or downgrading the firmware arbitrarily unless necessary, as this can sometimes brick your LaserPecker unit.
Related to