1. Install LDS
(1) Download the LaserPecker Design Space (LDS) software and select the appropriate version for your computer. If you are unsure which Mac version to download, please refer to How to Check Your Mac's Chip Type .
(2) Run the downloaded ".exe" file and select your preferred language.
(3) Read and accept the license agreement to continue.
(4) Select the folder where you would like to install LDS, then start the installation.
(5) After the installation is complete, the LDS icon will appear on your desktop.
2. Install Connection Drivers
Some computers may require additional communication drivers for stable device detection and connection in LDS.
If your computer cannot recognize the machine or fails to connect properly, we recommend installing the drivers below and restarting the computer.
Install the CH340 Driver
The CH340 Driver is a USB-to-serial communication driver that allows the computer to recognize and communicate with the machine via USB connection.
Install the CP210x Driver
The CP210x Driver is a USB-to-serial communication driver that allows the computer to recognize and communicate with the machine via USB connection.
Open the downloaded folder, select the "_x64.exe" file, and click "Install now".
3. Computer Minimum Requirements
| Items | Minimum Configuration | Recommended Configuration |
| Processor | Intel i5-6700HQ | Intel i5-11600 |
| Operating System | Windows 10 (64-bit) / macOS 10.15 or later | |
| Memory | 8 GB | 16 GB |
| Display Resolution | 1280 × 720 | 1920 × 1080 or higher |
| Storage | 256 GB | 1 TB |
4. Machine Firmware Version Compatibility
| Model | LP2 | LP3 | LP4 | LP5 | LX1 |
| Compatible Firmware Versions | 3.15-3.49 | 5.54-5.99 | 6.51-6.99 | 8.0.1 or later | 7009-7049 |
| 3.59-3.69 | 5510 | 6.511-6.599 | |||
| 3.74-3.99 | 5513 |